100A angle type constant water level valve is a diaphragm type valve for regulating the liquid level of water tank and water tower. The valve is divided into upper and lower chambers by a special reinforced nylon membrane. When the liquid level reaches the set position, the float ball pilot valve closes, and the valve closes when the pressure in the upper chamber is greater than that in the lower chamber. When the liquid level drops beyond the preset position, the float ball pilot valve opens, and the valve opens when the pressure in the upper chamber is less than that in the lower chamber. The valve supplies water to the pool. The angle type constant water level valve is easy to install, which can save pipe elbow and installation space. The valve is easy to maintain, flexible and durable, high accuracy of liquid level control, water level is not disturbed by water pressure and closed tightly without water leakage, reliable performance and low cost. The floating ball can be installed with the height and distance of the pool.

Application scope of 100A angle type constant water level valve:

At present, hydraulic control valve is widely used in petrochemical, chemical, gas, natural gas, liquefied petroleum gas, HVAC industry and general industry.

Hydraulic control valve is a general term, which is a kind of automatic control valve composed of a main valve and its external needle valve, guide valve, etc. The working state of hydraulic control valve is generally in common state, normally open state and floating state, which mainly depends on the adjustment between the main valve and needle valve or pilot valve to control the flow state.